Using the Brother TWAIN scanner driver with your Macintosh®

The Brother DCP software includes a TWAIN Scanner driver for Macintosh®. You can use this Macintosh® TWAIN Scanner driver with any applications that support the TWAIN specifications.

Mac OS X Scanning is supported in Mac OS X 10.2.1 or greater.

Accessing the scanner

Run your Macintosh® TWAIN-compliant application software. The first time you use the Brother TWAIN driver (MFL Pro/P2500), set it as the default by choosing Select Source (or the other menu name to select the device). Afterwards, for each document you scan choose Acquire Image or Scan. The scanner setup dialog box will appear.

The screen shown in this section are from Mac OS 9. The screen on your Macintosh® may vary depending on your Operating System.

The method of selecting the source or choosing to scan may vary depending on the application software you are using.

(OS 8.6–9.2)

USING YOUR DCP WITH A MACINTOSH® 11 - 14