■Make sure the envelope is straight as you insert it in the manual feed tray. If it is not, the envelope may not be fed properly, resulting in a skewed printout or a jam.
■Do not put more than one envelope in the manual feed tray at any one time, or it may cause a jam.
■Put the envelope in the manual feed tray, making sure that the side to be printed on is face up in the tray.
5 After the printed envelope comes out of the DCP, the DCP will wait until you put in the next envelope. Repeat Step 4 for each envelope you want to print.
6
7
Send the print data to the DCP.
After you finish the print job, close the back output tray.
For
2 Open the back output tray, and then pull out the
3 Open the MP tray and lower it gently.
6 - 13 USING THE DCP AS A PRINTER