CAUTION
Sewing
This sewing machine should only be used by op- erators who have received the necessary training in safe use beforehand.
The sewing machine should not be used for any applications other than sewing.
Be sure to wear protective goggles when using the machine.
If goggles are not worn, there is the danger that if a needle breaks, parts of the broken needle may enter your eyes and injury may result.
Turn off the power switch at the following times, otherwise the machine may operate if the treadle is depressed by mistake, which could result in in- jury.
•When threading the needle
•When replacing the needle
•When not using the machine and when leaving the machine unattended
*When using a clutch motor, the motor will keep turning even after the power is switched off as a result of the motor’s inertia. Wait until the motor stops fully before starting work.
If using a work table which has casters, the casters should be secured in such a way so that they cannot move.
Attach all safety devices before using the sewing machine. If the machine is used without these devices attached, injury may result.
Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in personal injury or damage to the machine.
For machines with automatic presser lifter, do not touch the solenoid section, otherwise burns may result.
If an error occurs in machine, or if abnormal noises or smells are noticed, immediately turn off the power switch. Then contact your nearest Brother dealer or a qualified technician.
If the machine develops a problem, contact your nearest Brother dealer or a qualified technician.
Cleaning
Turn off the power switch before starting any cleaning work, otherwise the machine may oper- ate if the treadle is depressed by mistake, which
could result in injury.
*When using a clutch motor, the motor will keep turning even after the power is switched off as a result of the motor’s inertia. Wait until the motor stops fully before starting work.
Be sure to wear protective goggles and gloves when handling the lubricating oil and grease, so that they do not get into your eyes or onto your skin, otherwise inflammation can result.
Furthermore, do not drink the oil or eat the grease under any circumstances, as they can cause vom- iting and diarrhoea.
Keep the oil out of the reach of children.
Maintenance and inspection
Maintenance and inspection of the sewing machine should only be carried out by a qualified technician.
Ask your Brother dealer or a qualified electrician to carry out any maintenance and inspection of the electrical system.
Turn off the power switch and disconnect the power cord from the wall outlet at the following times, otherwise the machine may operate if the treadle is depressed by mistake, which could result in injury.
•When carrying out inspection, adjustment and maintenance
•When replacing consumable parts such as the
loopers and knife
*When using a clutch motor, the motor will keep turning even after the power is switched off as a result of the motor’s inertia. Wait until the motor stops fully before starting work.
If the power switch needs to be left on when carry- ing out some adjustment, be extremely careful to observe all safety precautions.
Use only the proper replacement parts as speci- fied by Brother.
If any safety devices have been removed, be abso- lutely sure to
Any problems in machine operation which result from unauthorized modifications to the machine will not be covered by the warranty.
iii |
