WALK-UP PHOTOCAPTURE CENTER™ (MFC-3320CN ONLY) 12 - 13

Understanding the Error Messages

Once you are familiar with the types of errors that can occur while
you’re using the PhotoC apture Center™, you can easily identify and
troubleshoot any difficu lties.
When an error message appears on the LCD, the machine will beep
to get your attention.
Media Error—This message will appear if you insert a media card
that is either bad or not formatted, or when there is a problem with
the media drive. To clear this error, ta ke out the media card.
No File—This message will appear if you try to access the media
card in the drive (slot) does not contain a .JPG file.
Out Of Memory—This message will appear if you are working with
images that are too large for the machine’s memory.
Unsupported Card—This message will appear if you insert a
media card that is not supported.
Using PhotoCapture Center™ from your PC
You can access the media card th at is in the media drive (slot) o f the
machine from your PC.
See Using PhotoCapture Cent er™ from your PC. (See Using the
PhotoCapture Center™ from y our PC on page 7-1 in Softwa re User’s
Guide on the CD-ROM or Using the P hotoCapture Center™ from a
Macintosh® (MFC-3320CN and MFC-3820CN only) on page 9-23 in
Software User’s Guide on the CD-ROM.)
Using PhotoCapture Center

™

for scanning originals
You can scan the originals into a media card. (See Scan to Card
(MFC-3320CN and MFC-38 20CN only) on page 2-22 in Software
User’s Guide on the CD-ROM.)