6 - 8 SETUP SEND
Fax Resolution
You can use the Fax Resolution key to change the setting
temporarily (for this fax only). Press Fax Resolution and or
to select the setting you wan t, and then press Menu/Set.
—OR—
You can change the default set ting.
1
If it is not illuminated in green, press (Fax).
2
Load your original. ( See Load originals on page 2-1 .)
3
Press Menu/Set, 2, 2, 2.
4
Press or to select the
resolution you want.
Press Menu/Set.
5
Press Stop/Exit.
Manual and automatic fax R edial
If you are sending a fax manual ly and the line is busy, press
Redial/Pause, and then press Black Start or Color Start to try
again. If you want to make a second call to the last number dialed,
you can save time by pressing Redial/Pause and Black Start or
Color Start.
Redial/Pause only works if you dialed from the control panel.
If you are sending a fax automatically and the line is busy, the
machine will automatica lly redial one time after five mi nutes.
Standard Suitable for most ty ped originals.
Fine Good for small print and t ransmits a little
slower than Standard resol ution.
S. Fine Good for small print or artwork and transmits
slower than Fine resolution.
Photo Use when the original has varying shades of
gray. This has the slowest tran smission
time.
2.Fax Resolution