INTRODUCTION 1 - 11
When the TAD is in use, the LCD shows Telephone.
Connections
The external TAD must be plugged into the back of the machine, into
the jack labeled EXT. You r machine cannot work p roperly if you plug
the TAD into a wall jack (unless you are using Distinctive Ring).
1
Plug the telephone line cor d from the telephone wa ll jack into the
back of the machine, in the jack l abeled LINE.
2
Plug the telephone line cord from your external TAD into the
back of the machine, in the ja ck labeled EXT. (Make sure this
cord is connected to the TA D at the TAD’s telephone line jack,
and not its telephone jack.)
3
Set your external TAD to four rings or less. (The machine’s Ring
Delay setting does not appl y.)
4
Record the outgoing message on your external TAD.
5
Set the TAD to answer calls.
6
For MFC-3320CN, set the Receive Mode to External TAD.
(See Choosing the Receive Mode ( MFC-3320CN only) on page
5-1.)
For FAX-1920CN, set the Receive Mode to Manual (See
Choosing the Receive Mode (F AX-1920CN only) on page 5-3.)
Unless you are using Distinctive Ring, do not connect a
TAD elsewhere on the same phone line.
Make sure the Easy Receive Setting is ON. (See Easy Receive
(FAX-1920CN only) on page 5-9.)
TAD
TAD
(MFC-3320CN)