TROUBLESHOOTING AND ROUTINE MAINTENANCE 14 - 13
STEP B: Alignment Check
The LCD shows:
9
Check the 600 dpi and 1200 dpi test
prints to see if number 5 mos t closely matches number 0. If the
number 5 sample of both the 60 0 dpi and 1200 dpi are the best
matches, press 1 (Yes) to finish STEP B.
—OR—
If another test print num ber is a better match for either 600 dpi
or 1200 dpi, press 2 (No) to select it.
10
For 600 dpi, press the number of the
test print that most closely matches
the number 0 sample (1-8).
11
For 1200 dpi, press the numbe r of
the test print that most closely
matches the number 0 sample
(1-8).
12
Repeat Steps 1 and 2 (in Print Quality Check) to print another
sample Print Quality Check Sheet and then check it.
13
Press Stop/Exit.
When an ink head nozzle is
clogged the printed sampl e
looks like this.
After the ink head nozzle is
cleaned, the horizontal lin es
are gone.
Is Step “B” OK?
1.Yes 2.No
600dpi Adjust
Select Best #
1200dpi Adjust
Select Best #