5 - 7 SETUP RECEIVE
Setting the F/T Ring Time (Fax/Tel mode only)If you set the Receive Mode to Fax/Tel, you’ll need to decide how long
the machine will signal you with its special pseudo/double-ring when
you have a voice call. (If it’s a fax call, the machine prints the fax.)
This pseudo/double-ring happens after the initial ringing from the
phone company. Only the machine rings and no other phones on the
same line will ring with the special pseudo/double-ring. However, you
can still answer the call on the same line as the machine or on any
extension phone (in a separate wall jack) on the same line as the
machine. (See Operation from extension telephones on page 5-11.)
1
If it is not illuminated in green, press (Fax).
2
Press Menu/Set, 2, 1, 2.
3
Press or to select how
long the machine will ring to alert you that you have a voice call
(20, 30, 40 or 70 seconds).
Press Menu/Set.
4
Press Stop/Exit.
Setting the Fax/Tel Announcement (FAX-1920CN only)For the Fax/Tel receiv e mode, you can set up th e machine to play an
outgoing announcement fo r callers when no one is there to answ er
calls. (See Record Fax/Tel Outgoi ng Announcement (F/T OGM) on
page 9-7.)
Even if the caller hangs up dur ing the pseudo/double-ringin g,
the machine will continue to ring for the set time.
2.F/T Ring Time