4 - 7 GETTING STARTED
Setting the Paper Size (MFC-3320CN only)
You can use two sizes of paper for printing your faxes and copie s:
letter and legal. W hen you change the type o f paper you load in the
machine, you will need to change the setting for Paper Size at the
same time so your machine can fit an incoming fax on the page.
1
Press Menu/Set, 1, 3.
2
Press or to select
Letter or Legal.
Press Menu/Set.
3
Press Stop/Exit.
Setting the Ring Volume
You can adjust the ring volume when your machine is idle (not being
used). You can turn the rin g Off or you can select the ring volume
level.
1
Press Menu/Set, 1, 4, 1.
2
Press or to select
(Low, Med, High or Off).
Press Menu/Set.
3
Press Stop/Exit.
—OR—
In Fax mode, press or to adjust the volume level. Every time
you press these keys, the machine will ring so you can hear the
active setting as the LCD shows it. The volume changes with each
key press. The new setting will stay until you change it again.
For PhotoCapture Center and Copy Options, you can also
change the paper size to photo card size (4" × 6") for the next
copy or printout only.
(See Paper Size on page 11-8 and Paper & Size on page 12-9.)
3.Paper Size
1.Ring