4. INSTALLATION
. INSTALLATION
CAUTION
Machine installation should only be carried out by | All cords should be secured at least 25 mm away | |
a qualified technician. | from any moving parts. Furthermore, do not | |
Contact your Brother dealer or a qualified | excessively bend the cords or secure them too | |
firmly with staples, otherwise there is the danger | ||
electrician for any electrical work that may need | ||
that fire or electric shocks could occur. | ||
to be done. | ||
Be sure to connect the ground. If the ground | ||
The sewing machine weighs approximately 56 kg. | ||
connection is not secure, you run a high risk of | ||
The installation should be carried out by two or | ||
receiving a serious electric shock, and problems | ||
more people.. | ||
with correct operation may also occur. | ||
Do not connect the power cord until installation is | ||
Install the belt covers to the machine head and | ||
complete, otherwise the machine may operate if | ||
motor. | ||
the treadle is depressed by mistake, which could | ||
| ||
result in injury. |
| |
Use both hands to hold the machine head when |
| |
tilting it back or returning it to its original position. |
| |
If only one hand is used, the weight of the |
| |
machine head may cause your hand to slip, and |
| |
your hand may get caught. |
|
The thickness of the table should be at least 40 mm, and it should be strong enough to bear the weight and vibration of the sewing machine.
The method for processing the table will vary depending on whether the positioning method is vertical or horizontal. Make the holes in the correct places while referring to the table processing diagram which matches the positioning method.
[Vertical positioning]4091M
7 |