￿

9. CLEANING AND MAINTENANCE

 

 

￿

￿-￿. Draining the oil

Bed base

1.Remove the belt cover, and then gently tilt back the machine head.

2.Place the oil tank (1) against the underside of the table, and then remove the screw (2).

3.After the lubricating oil has been drained, make sure that the O-ring (3) is in the correct position, and

then tighten the screw (2).

*Wipe the magnet (4) and the bed base (5) so that they are free from dirt.

4070M

￿-￿. Cleaning the control box air inlet port

Use a vacuum cleaner to clean the filter in the air inlet port (2) of the control box (1) at least once a month.

* If the machine is used while the air inlet port is blocked, the inside of the control box will overheat. When this happens, the overheating error code (“E-40”) will be displayed and you will not be able to operate the sewing machine.

3970Q

￿-￿. Cleaning the eye guard

Wipe the eye guard clean with a soft cloth.

Note:

Do not use solvents such as kerosene or thinner to clean the eye guard.

2162Q

HE-800A

70