￿

7. CORRECT USE

 

 

￿

￿-￿. Threading the bobbin case

￿CAUTION

Turn off the power switch before removing or inserting the bobbin case, otherwise the machine may operate if the treadle is depressed by mistake, which could result in injury.

Purl stitch

Whip stitch

(seal stitch)

(plain stitch)

2812Q

1.Insert the bobbin into the bobbin case as shown in the illustration.

Note: If the bobbin is inserted back to front, the bobbin will spin freely and the work clamp pulse motor will get out of step.

2.Pass the thread though the slot (1) and then under the tension spring (2) and through the slot (3).

3.When sewing whip stitches, pull approximately 40 mm of thread out from the thread hole (4), and when sewing purl stitches, pull approximately 40 mm of thread out from thread hole (5).

HE-800A

60