5. OPERATION
Note: Set the circuit board DIP switch 2 - No.1 to ON. (Refer to “13. CHANGING FUNCTIONS USING THE DIP SWITCHES”.)
Start pedal
Work clamp
pedal
Work clamp lifter pedal
Three pedals
When the work clamp pedal (middle) is depressed, the work clamp lowers, and when it is depressed once more, the work clamp returns to the neutral position.
When the start pedal (right side) is depressed, sewing starts.
When the work clamp lifter pedal (left side) is depressed, the work clamp rises while the pedal is being depressed. (functions in the same way as depressing the treadle backward.)
3908Q
When circuit board DIP switch 2 - No. 3 is set to ON, you can set the work clamp to lower while the work clamp pedal is being depressed.
31 |