￿

5. OPERATION

 

 

￿

Example 2: How to set a taper tack for the front tack pattern and an eyelet for the rear tack pattern to program number

10.

3912Q

3913Q

First, set parameter number 01 to "buttonhole stitch (free) setting value 0".￿

1. Press the SELECT key (1) to change the mode to automatic, test feed or manual mode.

2. Press the program No. keys (2) and (3) to select the program number 10, and then press the ENTER key (4).

3. Press the SELECT key (1) to change the mode to program mode.

4. Press the program No. keys (2) and (3) to select the parameter number 01.

5. Press the parameter keys (5) and (6) to select the parameter setting value 0, and then press the ENTER key (4).

Next, set parameter number 20 to "Taper tacksetting value 4".

6. Press the program No. keys (2) and (3) to select the parameter number 20.

7. Press the parameter keys (5) and (6) to select the parameter setting value 4, and then press the ENTER key (4).

3914Q

 

 

Next, set parameter number 30 to "Eyelet setting

 

value 3".

 

8. Press the program No. keys (2) and (3) to select the

 

parameter number 30.

 

9. Press the parameter keys (5) and (6) to select the

 

parameter setting value 3, and then press the

 

ENTER key (4).

 

An eyelet taper-tack buttonhole has now been set

 

for program No. 10.

 

10. Press the SELECT key (1) to change the mode to

3915Q

automatic mode.

HE-800A

34