Brother HE-800A ￿￿. CHANGING FUNCTIONS USING THE DIP SWITCHES, ￿￿-￿.Panel DIP switches, Note:, DIP switch A

13. CHANGING￿ FUNCTIONS USING THE DIP SWITCHES

￿

￿￿. CHANGING FUNCTIONS USING THE DIP SWITCHES￿￿-￿. Panel DIP switches

Always turn off the power supply before changing any of the DIP switch settings.

Any changes to the DIP switch positions will not be effective until the power is switched off and back on again.

3993Q

							Note:
								Move the switches properly.
DIP switch A
No.	ON/OFF			Setting items							Default
	ON	Work clamp remains lowered after sewing is complete (rises when treadle is
1		depressed backward)									OFF
	OFF	Work clamp rises after sewing is complete
2	ON	-									OFF
	OFF	-
	ON	Pausing enabled	during	automatic	sewing	when	the	treadle	is	depressed
3		backward									OFF
	OFF	Pausing disabled	during	automatic	sewing	when	the	treadle	is	depressed
		backward
4	ON	Display setting during automatic mode = bobbin thread counter (Default: 100)									OFF
	OFF	Display setting during automatic mode = production counter (Default: 0)
	ON	2-cycle sewing ON (All programs will be set to 2-cycle sewing regardless of
5		the setting for parameter No. 55.)									OFF
	OFF	2-cycle sewing OFF
6	ON	-									OFF
	OFF	-
7	ON	Upper thread breakage detection disabled									OFF
	OFF	Upper thread breakage detection enabled
8	ON	Programs disabled									OFF
	OFF	Programs enabled

81 HE-800A