13. CHANGING FUNCTIONS USING THE DIP SWITCHES
DANGERWait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet before opening the face plate of the control box. Touching areas where high voltages are present can result in severe injury.
Always turn off the power supply before changing any of the DIP switch settings.
Any changes to the DIP switch positions will not be effective until the power is switched off and back on again.
Circuit board DIP switch 13994Q
|
| Note: |
| |
|
| Move the switches properly. | ||
|
|
|
| |
|
|
|
| |
No. | ON/OFF | Setting items | Default | |
1 | ON | - | OFF | |
OFF | - | |||
|
| |||
2 | ON | - | OFF | |
OFF | - | |||
|
| |||
3 | ON | - | OFF | |
OFF | - | |||
|
| |||
4 | ON | - | OFF | |
OFF | - | |||
|
| |||
5 | ON | - | OFF | |
OFF | - | |||
|
| |||
6 | ON | - | OFF | |
OFF | - | |||
|
| |||
7 | ON | Three warning beeps | OFF | |
OFF | Continuous warning beep | |||
|
| |||
| ON | Zigzag motor energization is turned off during pauses or when a |
| |
8 | thread breakage occurs | OFF | ||
| ||||
OFF | Zigzag motor energization is not turned off during pauses or | |||
|
| |||
| when a thread breakage occurs |
| ||
|
|
| ||
83 |