￿

4. INSTALLATION

 

 

￿

￿-￿. Installing the operation panel

3863Q

Top of work table

Table

Bottom of work table

Table

3864Q

The operation panel can be installed to either the top or bottom of the work table.

1.Install the rear frame (1) to the work table (top or bottom) with the four wood screws (2).

2.Install the front frame assembly (3) to the rear frame

(1)with the four screws (4).

* The vertical orientation of the front frame assembly

(3)is the same whether it is installed to the top or

the bottom of the work table.

*Pull the harnesses such as the ground harness out of the way so that the operation panel side cover

(5) can be opened and closed.

3.Insert the connector cord (6) into the control box through the hole at the side of the box.

￿-￿￿. Routing the connector cord and installing the oil stopper plate

3865Q

3866Q

1. Gently tilt back the machine head.

2. Pass the cords (1) through the hole in the work table.

3. Install the oil stopper plate (2).

4. Move the connector cord (1) so that it will not be clamped by the machine head and the bed base (3), and then return the machine head to its original position.

HE-800A

12