Setting up Polled Transmission

Polled Transmission is when you set up your MFC to wait with an original document so another fax machine can call and retrieve it.

1 If it is not illuminated in green, press (Fax). Load the original document that is going to be retrieved.

2

Press Menu,

2, 2, 6.

Setup Send

3

Press

or

to choose On (or

6.Polled TX

Off).

Press Set.

4 Press 1 for Doc to leave the paper original document waiting in the ADF.

—OR—

Press 2 for Memory to scan the original document into the memory.

5 Press 1 if you want to choose more settings and the LCD will return to the Setup Send menu.

—OR—

Press 2 if you have finished choosing settings, and go to step 6.

6 Press Start.

If you chose Memory in Step 4, the MFC starts scanning the original document.

■If you press 1 in Step 4, the original document remains in the ADF until your MFC is polled. If you must use your MFC before the polled transmission occurs, you must first cancel this job.

■If you press 2 in Step 4, the original document will be stored and can be retrieved from any other fax machine until you delete the fax in memory by using the Canceling a Job setting. (See Canceling a scheduled job on page 6-9.)

SETUP SEND 6 - 17