3 Press

or

to select

One-Touch Dial

Fax/Tel (or E-Address).

Fax/Tel

Press Set.

4 Enter the phone or fax number (up to 20 digits). Press Set.

—OR—

If you purchased the optional NC-9100h, you can select E-Addressin Step 3 and then press Set.

■If you want to enter a pause in the dialing sequence (for example, to access an outside line), press Redial/Pause as you are entering the digits.

Each key press of Redial/Pause enters a 3.5 second pause when the number is dialed, displayed by a dash on the screen.

5

6

Use the dial pad to enter the name (up to 15 characters). Press Set.

(You can use the chart on page 4-3to help you enter letters.)

—OR—

Press Set to store the number without a name. Go to Step 2 to store another One-Touch number.

—OR—

Press Stop/Exit.

When you dial an auto dial number, the LCD shows the name and number you have stored, or, if you have not stored a name, only the number you have stored.

AUTO DIAL NUMBERS AND DIALING OPTIONS 7 - 2