Easy Receive

When you use this feature, you do not have to press Start or the Fax Receive Code 5 1 when you answer a fax call and hear calling beeps. Just hold the handset and wait a few seconds. When you see Receiving on the LCD or when you hear “chirps” through the handset of an extension phone connected to another wall jack, just replace the handset. Your MFC does the rest. Selecting On allows the MFC to receive fax calls automatically, even if you lift the handset of an extension or external phone. Selecting Semi lets the MFC receive the call only if you have answered it at the MFC. Selecting Off means you will have to activate the MFC yourself, by pressing Start or by pressing 5 1 if you are not at your MFC.

(See Operation from extension telephones on page 5-7and For Fax/Tel mode only on page 5-7.)

If you have set the feature to On, but your MFC does not automatically connect a fax call when you lift an external or extension phone handset, press the Fax Receive code 5 1. At the MFC, lift the handset and then press Start.

If you send faxes from a computer on the same phone line and the MFC intercepts them, set Easy Receive to Off.

1

If it is not illuminated in green, press

(Fax).

2

Press Menu, 2, 1, 3.

Setup Receive

3

Use

or

to select On, Semi,

3.Easy Receive

or Off. Press Set.

4 Press Stop/Exit.

SETUP RECEIVE 5 - 4