Setting the Tray Use for Fax mode

If your MFC does not have the optional tray #2, you can skip this setting. The default setting of Auto allows your MFC to choose the paper from the optional Tray #2 if Tray #1 is out of paper or if incoming faxes will fit best on the paper in Tray #2.

1

2

Press Menu, 1, 9.

General Setup

Press

or

to select Tray#1

9.Tray Use:Fax

Only, Tray#2 Only or Auto.

3

4

Press Set.

Press Stop/Exit.

If Auto Reduction is turned on, incoming faxes will be printed from the tray that is set for Auto Reduction. (See Printing a reduced incoming fax (Auto Reduction) on page 5-5.)

GETTING STARTED 4 - 13