
General Setup
Setting the Mode Timer
The MFC has three temporary mode keys on the control panel: Fax, Copy and Scan. You can change the number of seconds or minutes the MFC takes after the last Copy or Scan operation before it returns to Fax mode. If you select Off, the MFC stays in the mode you used last.
1 | Press Menu, 1, 1. |
| General Setup | |
2 | Press | or | to select | 1.Mode Timer |
0Sec, 30 Secs, 1 Min, 2 Mins,
5Mins or Off.
3 Press Set.
4 Press Stop/Exit.
Setting the Paper Type
To get the best print quality, set the MFC for the type of paper you are using.
1 Press Menu, 1, 2.
If you have the optional paper tray, press Menu, 1, 2, 1 to set the paper type for Tray #1 or Menu,
1, 2, 2 to set the paper type for Tray #2.
2
3
4
Press or
to select Thin, Plain, Thick, Thicker or Transparency.
Press Set.
Press Stop/Exit.
You can select Transparency only when A4, Letter or Legal is selected in Menu, 1, 3 for Tray #1 and Tray #2.
GETTING STARTED 4 - 5