10 Making copies

Using the MFC as a copier

You can use your MFC as a copier, making up to 99 copies at a time.

Enter Copy mode

Before making copies, make sure that (Copy) is illuminated

in green. If it is not, press (Copy) to enter Copy mode. The

default setting is Fax. You can change the number of seconds or minutes that the MFC stays in Copy mode after a copy operation. (See Setting the Mode Timer on page 4-5.)

The printable area of your MFC begins at approximately 0.17 in. (4.32 mm) from both sides and 0.12 in. (3 mm) from the top or bottom of the paper.

Ex: Letter (Original) Letter (Paper)

0.17" (4.32 mm)

 

Unprintable

 

 

 

 

area

 

 

 

 

 

 

0.12" (3 mm)

While the MFC is copying, incoming faxes will be received into the memory instead of being printed.

10 - 1 MAKING COPIES