Before starting installation

Be careful when handling the NC-9100h. There are many delicate electronic components that are susceptible to damage from static electricity. To avoid such damage, use the following precautions when handling the board.

■Leave the NC-9100h in its anti-static bag until you are ready to install it.

■Make sure that you are adequately grounded before touching the NC-9100h. Use an anti-static wrist strap and a grounding mat if possible. If you do not have an anti-static wrist strap, touch the bare metal surface on the back of the machine before handling the NC-9100h.

■Avoid moving around the work area in order to eliminate static charge build-up.

■If possible, do not work on a carpeted area.

■Do not flex the board and do not touch the components on the card.

Tools Required:

Phillips Screwdriver

Step 1: Hardware installation

WARNING

DO NOT touch the surface of the main board within 15 minutes after turning off the power.

■Do NOT unplug any internal connectors.

1Disconnect the telephone line cord and handset curled cord from the MFC, turn the MFC power switch off, unplug the MFC power cord from the AC power outlet, and then disconnect the interface cable.

OPTIONAL ACCESSORIES 13 - 5