Cabletron Systems 9C300-1 manual Interactive Mode Screens

9C300-1 Environmental Module Operation

Interactive Mode

The LCD enters this mode upon installation. This mode allows user input through the five-function keypad to navigate through MMAC-Plus status screens, and to make menu selections.

Press any button on the keypad to enter this mode from the non-interactive mode. Once past the Main screen, the Interactive Mode is maintained for three minutes without a keypad entry before returning to the non-interactive mode.

Interactive Mode Screens

This section describes the LCD screens that display in the Interactive Mode. The Interactive Mode screen flow, as shown in Figure 3-12,provides a representation of the Interactive Mode screen structure hierarchy.

Main Screen

System

Alarms

Modules

Screen Contrast

Pwr	Environment	Diag	Com	BBU	Modules Selection Screen	Screen Adjust
		Results

Pwr

Supply

Specific

Modules/Environmental Module Specific Screen

Environment

Memory

Backplane

Figure 3-12. Interactive Mode Screen Flow

3-12