EPIM Specifications
EPIM-F1 and EPIM-F2
The EPIM-F1 and EPIM-F2 support Multimode Fiber Optic cabling. Each EPIM has an internal Cabletron Systems FOT-F™ Fiber Optic Transceiver. The EPIM-F1 is equipped with SMA Connectors and the EPIM-F2 is equipped with ST Connectors. Figure A-2shows both EPIMs. Specifications for the EPIMs are listed in Table A-1.
Figure A-2. EPIM-F1 and EPIM-F2
Table A-1. EPIM-F1 & EPIM-F2 Specifications
| Parameter | Typical Value | Worst | Worst Case | Typical |
| Case | Budget | Budget |
| | |
| | | | | |
| | | | | |
| Receive | -30.5 dBm | -28.0 dBm | — | — |
| Sensitivity | | | | |
| | | | | |
| Peak Input | -7.6 dBm | -8.2 dBm | — | — |
| Power | | | | |
| | | | | |
Transmitter power parameters are listed Table A-2.
