Cabletron Systems 9C300-1 manual Env

9C300-1 Environmental Module Operation

Select <ACKNOWLEDGE> after reading all alarms to reset the front panel ALARM LED (red to green). Selecting <ACKNOWLEDGE> deletes all alarms and resets the alarm pending banner on line 4 of the non-interactive screens.

Select <EXIT> to return to the Main Screen.

The System Screen

Select the <SYSTEM> option field in line 4 of the Main Screen, as shown in Figure 3-13,to access the System Screen as shown in Figure 3-15.This screen displays information specific to the MMAC-Plus chassis. Lines 1 and 2 display the MMAC-Plus chassis Internet Protocol (IP) address and Media Access Control (MAC) address.

Line 3 displays the current chassis hardware revision and serial number.

Line 4 lists the following five submenus. Access a specific submenu by selecting it on the screen.

<PWR>	Displays general power supply configuration information,
	with the option to view statistics on specific power supply
	modules.
<ENV>	Displays environmental information about the chassis.
<COM>	Displays statistics and information about the front panel
	COM ports and EPIM on the Environmental Module.
<DIAGS>	Displays the results of power-up or restart diagnostic tests.
<BBU>	Displays status of BBUs, if they are installed.

CHASSIS IP ADDRESS xxx.xxx.xxx.xxx CHASSIS MAC ADDRESS xx-xx-xx-xx-xx-xx CHASSIS HW REV xxx SN xxxxxxxxxxxx <PWR> <ENV> <COM> <DIAGS> <BBU> <EXIT>

Figure 3-15. The System Screen

Select <EXIT> to return to the Main Screen.

3-14