Cabletron Systems manual Enterprise Specific Traps for the ELS10-26

Traps

authenticationFailure (4) - This trap is generated whenever the community name in a PDU does not match the corresponding password. All SetRequest PDUs must match the configAnyPass (refer to the of lxadminGetPass for SetRequest exceptions), GetRequest PDUs must match either the lxadminGetPass or the configAnyPass. The GetRequest exception is for one of the debugging attributes; those PDUs must always provide the lxadminAnyPass.

egpNeighborLoss (5) - Not used by the ELS10-26.

7.2 ENTERPRISE SPECIFIC TRAPS FOR THE ELS10-26

This section lists the enterprise-specific traps that can be generated by the ELS10-26. ELS10-26 traps contain enterprise-specific variables that are defined in the system group of the Cabletron MIB in Chapter 6 of this manual.

lxWriteStatusTrap (2) - Sent when a bank of Flash EPROM has been erased. If lxswdisWriteStatus indicates success, then the unit is ready to be downloaded with the new software.

Cabletron MIB variables include:

•lxTrapSeverity

•lxswdisWriteStatus

•lxwdisDesc

lxPortFunctionsTrap (3) - Sent whenever the current functional state (active protocols) of the port has changed.

Cabletron MIB variables include:

•lxTrapSeverity

•lxifFunction

7-2