CHAPTER 5
PPP MIB
The ELS10-26 supports RFC 1471 for PPP link control and RFC 1473 for PPP IP support.
The MIB tree for reaching the PPP group is:
1.3.6.1.2.1.10
ppp{transmission 23}
5.1 PPP LINK CONTROL TABLE
pppLinkStatusTable{pppLink1} Not-Accessible
A table containing PPP-Link specific variables for this PPP implementation.
pppLinkStatusEntry | {pppLinkStatusTable 1} |
Not-Accessible | |
Management information about a particular PPP Link.
pppLinkStatusPhysicalIndex | {pppLinkStatusEntry 1} |
Integer Read-only | |
The value of ifIndex that identifies the lower-level interface over which this PPP Link is operating. This interface would usually be an HDLC or RS-232 type of interface. If there is no lower layer interface element, or there is no ifEntry for the element, or the element can not be identified, then the value of this object is 0. For example, suppose that PPP is operating over a serial port. This would use two entries in the ifTable. The PPP could be running over ‘interface’ number 123 and the serial port could be running over ‘interface’ number 987. Therefore, ifSpecific.123 would contain the OBJECT IDENTIFIER ppp pppLinkStatusPhysicalIndex.123 would contain 987, and
