Cabletron Systems ELS10-26 manual Bridge MIB

Bridge MIB

dot1dStpPriority	{dot1dStp 2}
Integer Read-Write

The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress.

Any value from 0 to 65535 may be specified.

dot1dStpTimeSinceTopologyChange	{dot1dStp 3}
Time Ticks Read-Only

The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.

Zero if a topology change is in progress; otherwise, the time since the topology last stabilized.

dot1dStpTopChanges	{dot1dStp 4}
Counter Read-Only

The total number of topology changes detected by this bridge since the management entity was last reset or initialized.

dot1dStpDesignatedRoot	{dot1dStp 5}
Octet String Read-Only

The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.

dot1dStpRootCost	{dot1dStp 6}
Integer Read-Only

The cost of the path to the root as seen from this bridge.

dot1dStpRootPort	{dot1dStp 7}
Integer Read-Only

The port number of the port which offers the lowest cost path from this bridge to the root bridge.

4-4