Cabletron Systems ELS10-26 manual Cabletron Trap Management Group

ELS10-26 MIB

6.1.12 Cabletron Trap Management Group

This group presents the Cabletron MIB variables that are included as varbinds with the traps generated by the ELS10-26. Chapter 7 of this manual describes the traps generated by the ELS10-26.

lxtrapControlTable	{lxtrapMgt 1}
Not Accessible

This table contains information about the severity of each trap and whether the trap is currently enabled.

lxtrapControlEntry	{lxtrapControlTable 1}
Not Accessible

The sequence of elements in the lxtrapControlTable are shown below:

•lxtrapIndex Integer Read-Only

•lxtrapEnabled Integer Read-Write

•lxtrapSeverity Integer Read-Write

•lxtrapTex Display String Read-Only

lxtrapIndex	{lxtrapControl 1}
Integer Read-Only
Identifies the specific trap number.
lxtrapEnabled	{lxtrapControl 2}
Read-Write

Allows you to enable or disable the generation of this trap.

lxtrapSeverity	{lxtrapControl 3}
Integer Read-Write

A user-definable severity indicating the importance of the trap. The severity levels are defined as follows:

6-31