Cabletron Systems ELS10-26 manual Address Translation Group

TCP/IP MIB-II

ifOutQLen	{ifEntry 21}
Gauge Read-Only

The maximum length ever obtained by the port’s outbound packet queue (in packets) is not available, so this value is always one.

ifSpecific	{ifEntry 22}
Object Identifier Read-Only

The object identifier of the MIB for the type of port, i.e., one of the following:

{dot3}	for Ethernet ports (dot3 is defined
	later, as {transmission 7}).
{ppp}	for the UART (ppp is defined later, as
	{experimental 18}).

2.3 ADDRESS TRANSLATION GROUP

at {mib-2 3}

The TCP/IP Address Translation Group parameters are minimally supported (i.e., for any parameter in this group, the ELS10-26 returns a GetResponse with a noSuchName ErrorStatus). It is anticipated that the Address Translation Group will be deleted from TCP/IP MIB III, since there will be separate address translation tables for every type of network protocol (indeed, TCP/IP MIB II already defines the IP Address Translation Table).

The TCP/IP Address Translation Group parameters are described below.

2-8