Cabletron Systems manual ELS10-26 MIB

ELS10-26 MIB

lxifTxStormTime	{lxifEntry 9}
Time Ticks Read-Write

The period of time, in centiseconds, which qualifies sifTxStormCnt (not applicable for the UART port).

llxifFunction	{lxifEntry 16}
Integer Read-Only

The current functional state (protocols which have been activated and are operational) of the port. The following values or combinations thereof are supported:

0x0001 NMS - the port may be used for communicating with the NMS (see ifOperStatus).

0x0002 TBRIDGE - use the port for Transparent IEEE 802.1d bridging (see lxsprotoBridge).

0x0020 NO_BPDU - if TBRIDGE is set, this disables the sending of BPDUs (see lxsprotoSuppressBpdu) and keeps the port in forwarding state (this is to provide interoperability with non-compliant IEEE 802.1d implementations; however, if the physical topology has any loops, then LAN segments will most likely be flooded with duplicates of packets).

0x0040 RIP_LISTENER - use RIP on the port for IP Routing (see sprotoRip).

0x0800 ARP - use the port for resolving ARP.

0x10000 TRUNKING - use the port for Trunking Protocol.

These values can be configured through the lxsprotoTable.

lxifRxHwFCSs	{lxifEntry 18}
Counter Read-Only

Number of received packets discarded due to FCS errors.

6-18