Cabletron Systems ELS10-26 manual IP Address Translation Table

TCP/IP MIB-II

ipRouteInfo	{ipRouteEntry 13}
Object Identifier Read-Write

A reference to additional MIB definitions, specific to the routing protocol which is responsible for this route. This information is not present in the ELS10-26, so ipRouteInfo should be set to the object identifier {0 0}.

2.4.3 IP Address Translation Table

The TCP/IP IP address translation table contains mappings of Internet addresses to MAC addresses, except for the Internet addresses of the ELS10-26 itself. The parameters are Read/Write, according to TCP/IP MIB-II; however, the ELS10-26 has the restriction that a dynamic entry should not be modified, except to be made “invalid” (any other modifications will cause a static entry to be created). When adding a row, the following defaults are used:

•ipNetToMediaIfIndex is obtained from the row’s instance identifier.

•ipNetToMediaPhysAddress defaults to 0.

•ipNetToMediaNetAddress is obtained from the row’s instance identifier.

•ipNetToMediaType defaults to “static”.

Parameters include the following:
ipNetToMediaTable	{ip 22}
Not Accessible

A list of IP address translation entries; one per port number and IP address.

2-17