Cabletron Systems manual ELS10-26 MIB

ELS10-26 MIB

lxprotoIfIndex	{lxsprotoEntry 1}
Integer Read-Only

Identifies the interface (port) to which this entry’s information belongs. The value of this variable corresponds to lxifIndex, as well as to most of the other port identification values in related MIBs.

lxprotoBridge	{lxsprotoEntry 2}
Integer Read-Write

Defines the bridging method to be applied to frames received at, or destined for this port. Ethernet and FDDI ports may be configured for transparent, srt, or none. Token Ring ports may be configured for any of the four options. The UART may only be configured to none.

lxprotoSuppressBpdu	{lxsprotoEntry 3}
Integer Read-Write

Allows transmission of spanning tree protocol packets to be suppressed. Values include:

•normal (1) – 802.1d Spanning Tree protocol packets are transmitted as usual

•suppressed (2) – these packets are not transmitted. This option may be useful for interoperability with non-802.1d spanning tree protocols.

lxprotoRipListen	{lxsprotoEntry 4}
Integer Read-Write

Specifies whether the port should listen for internet RIP packets so the ELS10-26 can build a routing table for the unit. Values include:

•enabled (1)

•disabled (2)

6-25