Cabletron Systems manual ELS10-26 MIB

ELS10-26 MIB

lxtrunkState	{lxtrunkEntry 2}
Integer Read-Only

Indicates the trunking condition for this port. Values include:

•off (1) – this link has not been enabled for trunking.

•closed (2) – this link has not yet received any PDUs.

•oneway (3) – incoming trunking PDUs do not indicate that the ELS10-26’s PDUs are being successfully received by the far end.

•joined (4) – this link is actively participating in the trunk group.

•perturbed (5) – this link is actively participating in the trunk group; however, the transmission of data packets has been temporarily stopped due to a change in membership of the trunk group.

•helddown (6) – an error has been detected and this link is being held out of service until the error clears.

•broken (7) – this link has been configured for trunking but the port is physically non-operational.

lxtrunkRemoteBridgeAddr	{lxtrunkEntry 3}
Octet String Read-Only

The MAC address portion of the bridge ID of the remote bridge.

lxtrunkRemoteIp	{lxtrunkEntry 4}
IP Address Read-Only
The IP address of the remote bridge.
lxtrunkLastError	{lxtrunkEntry 5}
Integer Read-Only

The reason for failure when the link is in the held-down state. Values include:

6-27