Cabletron Systems ELS10-26 manual Traceroute

ELS10-26 MIB

::= {lxpingEntry 12} lxpingNumReceived OBJECT-TYPE

SYTAX	INTEGER
ACCESS	read-only
STATUS	mandatory
DESCRIPTION	The number of ICMP
	ECHO_RESPONSE messages
	that have been received as a
	result of this ping request.
::= {lxpingEntry 13}

6.1.14 Traceroute

An implementation of traceroute was added in order to add the ability to orginate a traceroute request from the ELS10-26. The request can be started from LCM, or from SNMP. If the request is originated from the LCM, the results are printed out on the LCM console.

The LCM command is as follows:

traceroute [-m max_ttl] [-q nqueries] [-w wait] host_IP [data_size]

The traceroute MIB has a variable which indicates the amount of time the results of a traceroute request is accessible from SNMP. It also has a table, indexed by NMS IP address, ping destination IP address, hop count, and probe count which is used to start the traceroute request and fetch the results. Each entry in the table will contain the round trip time and state of each particular probe in each hop.

6-41