Cabletron Systems ELS10-26 manual

ELS10-26 MIB

lxdot3TxBabbles	{lxdot3Entry 8}
Counter Read-Only4

Counter indicating the number of packets transmitted with babble errors.

lxdot3TxCollisions	{lxdot3Entry 9}
Counter Read-Only

Counter indicating the total number of transmit collisions.

lxdot3SpeedSelection	{lxdot3Entry 13}
Integer Read-Write

Speed may only be selected for the Fast Ethernet Ports. In addition, the speed -10 mbit option (2) may only be selected for Fast Ethernet copper ports.

The returned value reflects what has been selected, not the actual speed value; e.g. the port may actually be 10 or 100 Mbps, but speed-auto will be the value returned if it was previously selected.

•speed - 10mbit (1)

•speed - 100mbit (2)

•speed - auto (3)

lxdot3DuplexSelection	{lxdot3Entry 14}
Integer Read-Write

All duplex options are valid for all 10 and 100 Mbps ports. The returned value reflects what has been selected, not the actual duplex value; e.g. the port may actually be in half-duplex or full duplex mode, but duplex-auto will be the value returned if it was previously selected.

• duplex-auto (1)

4.These statistics are only updated if the ELS10-26 has been configured to gather extended statistics (lxadminStatsExtended).

6-22