Cabletron Systems ELS10-26 manual Administration Group

ELS10-26 MIB

lxswBases	{lxswFilesetEntry 7}
Octet String Read-Only

An array (4 octets per file), containing the software’s base loading address of each of the files. Each address is encoded as a series of 4 bytes, which should be converted into a 32-bit integer.

lxswFlashBank	{lxswFilesetEntry 8}
Integer Read-Only

The bank number where the software file set resides. The possible values are:

•first-bank (1)

•second-bank (2)

6.1.3 Administration Group

lxadminFatalErr	{lxadmin 1}
Octet String Read-Only

This is a 32-byte array which contains information about the cause of the previous system reset. This will describe the circumstances which forced the system software to perform a reboot. The values in the first byte have the following meanings:

•(0) - Power failure

•(1) - Watchdog Timeout

•(2) - NMS Requested Shutdown; next three bytes are not applicable; next four bytes contain the NMS’s IP address; remaining 24 bytes are not applicable)

•(3-255) - Fatal Error

6-6