ELS10-26 MIB
lxadminAnyPass | {lxadmin 2} |
Octet String Read-Write | |
The authentication password (0-24 bytes) which must match the community name in an SNMP Get, Getnext, or Set PDU, in order for the operation to be performed. A zero length password indicates that any community name is acceptable.
lxadminGetPass | {lxadmin 3} |
Octet String Read-Write | |
The authentication password (0-24 bytes) which must match the community name in an SNMP Get or Getnext PDU (except for debug or password parameters). A zero length password indicates that any community name is acceptable. Alternatively, it is acceptable if the community name matches lxsdminAnyPass, defined above.1
lxadminNMSIPAddr | {lxadmin 4} |
IP Address Read-Write | |
The address of the NMS to which Trap PDUs are to be sent. A value of zero indicates that Trap PDUs should be sent to the NMS last heard from.
lxadminStorageFailure | {lxadmin 7} |
Integer Read-Only | |
Whether the ELS10-26’s storage facility for its configuration parameters has failed during the last update operation (if the ELS10-26 reboots after such a failure, it will use the factory specified defaults for all MIB parameters). Values include:
• true (1)
1.Certain SetRequest PDUs are used for read operations and using lxadminGetPass for the community name is sufficient. Those special conditions consist of SetRequest PDUs for lxaddrOperation (for read-random, read-next, and read-block only), and for all MIB variables in the lxaddr group described as Write-Ignore.
