Cabletron Systems ELS10-26 manual IP Routing Table

TCP/IP MIB-II

ipAdEntReasmMaxSize	{ipAddrEntry 5}
Integer Read-Only

The largest IP datagram which can be reassembled, i.e., the constant 4470.

2.4.2 IP Routing Table

The TCP/IP IP routing table contains the routing information for each route currently known by the ELS10-26. When adding a row, the entire row must be specified, except for the following defaults:

•ipRouteDest is obtained from the row’s instance identifier.

•ipRouteMetric1 defaults to 0.

•ipRouteMetric2 defaults to lxadminStaticPreference.

•ipRouteMetric3 through ipRouteMetric5 default to -1.

•ipRouteNextHop is obtained from the row’s instance identifier.

•ipRouteType defaults to “direct” if ipRouteNextHop is not specified, or if ipRouteNextHop is specified and it, combined with ipRouteMask, equals the same network as that defined by ipRouteDest.

•ipRouteProto defaults to “netmgmt”.

•ipRouteMask defaults to the standard network class mask based on the row’s instance identifier (except 255.255.255.255 is used if the row’s instance identifier contains a non-zero host portion).

Parameters include the following variables:

ipRouteTable	{ip 21}
Not Accessible

A list of routing entries; one per route. An entry is keyed by an IP address (ipRouteDest, defined below). If there are multiple entries

2-14