Cabletron Systems ELS10-26 manual dot1dTpAgingTime

Bridge MIB

dot1dTpAgingTime	{dot1dTp 2}
Integer Read-Write

The timeout period in seconds for aging out dynamically learned forwarding information.

dot1dTpFdbTable	{dot1dTp 3}
Not Accessible

A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.

A superset of this table’s information can be found by using Cabletron’s enterprise-specific Addresses Configuration Group.

dot1dTpFdbEntry	{dot1dTpFdbTable 1}
Not Accessible

Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information.

dot1dTpFdbAddress	{dot1dTpFdbEntry 1}
Octet String Read-Only

A unicast MAC address for which the bridge has forwarding and/ or filtering information.

dot1dTpFdbPort	{dot1dTpFdbEntry 2}
Integer Read-Only

Either the value 0, or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1dTpFdbAddress has been seen. A value of 0 indicates that the port number has not been learned but that the bridge does have some forwarding/filtering information about this address (e.g., in the dot1dStaticTable). Implementors are encouraged to assign the port value to this object whenever it is learned even for addresses for which the corresponding value of dot1dTpFdbStatus is not learned(3).

4-10