Canon CS-S 4.3 Selecting ScanGear CS-S, Removing ScanGear CS-S, Where to Go From Here, Next Steps

CONTENTS	Chapter 2	11
	Installing ScanGear CS-S 4.3
GLOSSARY

INDEX

Selecting ScanGear CS-S

ScanGear CS-S can be called from any TWAIN-compliant application, such as an imaging or OCR application.

Because the TWAIN-compliant application may install older TWAIN files than ScanGear CS-S’s, it is recommended that the application be installed first, before ScanGear CS-S.

If you have installed other TWAIN drivers on your computer, you may select it as your default TWAIN source by using the application’s ‘File/Acquire/Select TWAIN_32 Source’ menu option or its equivalent. Once you have selected ScanGear CS-S as your source, choosing the command to scan, such as ‘File/ Acquire’, or ‘File/Scan’ will automatically start ScanGear CS-S in the application.

Removing ScanGear CS-S

If you need to remove ScanGear CS-S from your system, use the following steps to make sure all files are removed from all locations. Refer to the Quick Start Guide for instructions.

Where to Go From Here

Now that your ScanGear CS-S is installed and your scanner is ready to run, you can start scanning or read more about scanning techniques. ScanGear CS-S is easy to use, but more help is available if you need it.

Next Steps

•To start scanning, see Chapter 3, “Scanning.”

•For detailed information on scanning and manipulating images, see Chapter 5, “Scanning Techniques.”

•For information about using ScanGear Toolbox CS, see Chapter 6, “Using ScanGear Toolbox CS.”

11