CONTENTS
GLOSSARY
INDEX
Chapter 6 | 67 |
Using ScanGear Toolbox |
|
|
Setting Up ScanGear Toolbox CS
You can add or remove buttons from the ScanGear Toolbox CS bar, change the buttons’ settings, or enable Easy Acquire. When you install ScanGear Toolbox CS, the Fax, Mail, and Copy buttons appear on the ScanGear Toolbox CS bar automatically.
Adding a Button to the ScanGear Toolbox CS Bar
You can add a button from the ScanGear Toolbox CS bar at any time. The following steps provide an overview of the procedure for adding a button. For details on configuring each button’s settings, see the individual button’s sections later in this chapter.
To add a button:
1.Click Settings.
2.In the ScanGear Toolbox CS settings dialog box, click the tab for the button you want to add. For example, to change settings for the Mail button, click the Mail tab.
3.Under button Links, select System Default, Application, Driver from the Link to list, or click Browse to link an application’s .exe file to the button.
4.Select the Show This Button check box.
5.Click OK.
Note: | Some buttons have additional button settings. |
Removing a Button from the ScanGear Toolbox CS Bar
When you remove a button from the ScanGear Toolbox CS bar, the settings for that button remain the same, so you can
To remove a button from the ScanGear Toolbox CS bar:
1.Click Settings.
2.Click the tab for the button you want to remove.
3.Clear the Show This Button check box.
4.Click OK. The button does not appear on the Toolbox bar.
67
