CONTENTS

GLOSSARY

INDEX

Chapter 6

66

Using ScanGear Toolbox CS-S

 

 

Starting ScanGear Toolbox CS

Simply push the Start button in front of the CanoScan FB1200S to launch ScanGear Toolbox CS on your computer.

About the ScanGear Toolbox CS Bar

The ScanGear Toolbox CS bar is a window with a set of tool buttons and other configuration options. You can add or remove the Toolbox buttons by clicking the Settings button and changing the settings for each tool. The Fax, Mail, and Copy buttons are preset. There are four additional buttons you can add to the ScanGear Toolbox CS bar: one edit and three custom buttons.

The Easy Acquire check box lets you scan an image without opening the ScanGear CS-S window. When the Easy Acquire check box is selected, and you click a button in the ScanGear Toolbox CS bar, the scan occurs automatically, using the default settings.

When Easy Acquire check box is cleared, and you click a button in the ScanGear Toolbox CS bar, ScanGear CS-S opens and lets you configure the scanning settings manually before scanning.

The ScanGear Toolbox CS bar, before you add or remove buttons, looks like this:

When Easy Acquire is selected, you don’t see the ScanGear CS-S window and the image is acquired and processed automatically.

Open the online help.

Click to add and delete buttons from the ScanGear Toolbox CS bar, and configure settings for each button.

66

Page 66
Image 66
Canon CS-S 4.3 manual Starting ScanGear Toolbox CS, About the ScanGear Toolbox CS Bar