Mirror Lockup, Press the shutter button completely | Canon EOS-1V

Mirror Lockup

Mirror lockup is enabled with C.Fn-12 (→p.106). This prevents mirror- caused vibrations which may blur the image during close-ups or when a super telephoto lens is used. To set this Custom Function, see “Selecting and Setting a Custom Functions” on page 96. When mirror lockup is set, the camera operates as follows.

•When using mirror lockup, Remote Switch RS-80N3 (sold separately) is recommended.

1 Press the shutter button completely.

The mirror locks up, and after 30 seconds, it will go back down automatically. Pressing the shutter button completely again locks up the mirror again.

2Release the shutter button and press the shutter button completely again to take the picture.

The picture is taken and then the mirror goes back down.

• In very bright light such as at the beach or ski ground on a sunny day, take the picture promptly after mirror lockup.

•During mirror lockup, do not point the camera lens at the sun. The sun’s heat can scorch and damage the shutter curtains.

•If you use mirror lockup with the self-timer for a bulb exposure, there will be a shutter release sound when you release the shutter button during self-timer operation. This is not the sound of the shutter release.

• During mirror lockup, the film advance mode will be single-frame shooting regardless of the current film advance mode.

•If mirror lockup is used with the self-timer, pressing the shutter button completely the first time will lock up the mirror and release the shutter 10 seconds or 2 seconds later (depending on the delay time selected).

81

Image 81

Canon EOS-1V HS manual Mirror Lockup, Press the shutter button completely

Contents

Instructions Page Symbols PrecautionsThank you for purchasing a Canon product Contents For EOS-1V HS Users Flash Photography Camera Care and Storage Handling Precautions LCD Displays How Low Battery Levels Affect Camera OperationLithium Batteries Lens Electrical Contacts Nomenclature Side Door Buttons AEB LCD Panel Viewfinder Information Conventions Used in this Instruction Booklet Page Main Switch Basic OperationShutter Button Using the Electronic Dials Halfway pressingComplete pressing Page There are three ways to use Reverting to the Default Settings Resetting the camera to the default settings Open the side door and press the buttonOpen the side door, press the button, then press the button 2Open the cover Install the battery Installing the Battery and Checking the Battery LevelRemove the grip Reattach the grip Checking the Battery Level Battery Life No. of RollsTurn the to Mounting and Detaching a Lens Mounting a LensDetaching the Lens 2Turn the dioptric adjustment knob Dioptric AdjustmentFilm ID Imprinting Remove the eyecup 2Turn the dial to set the desired user-settable No Press Button to set Film ID setting mode Press the shutter button halfway Loading Film Loading and Unloading FilmOpen the camera back Insert the film cartridge at an 4Close the camera back Press the and buttons simultaneously Setting the Film Speed Unloading Film Midroll RewindPress the button 2Take out the film cartridge 2Quick Start With Program AE Focus the subject Select on the LCD panel Shifting the Program Holding the Camera 3Using Autofocus AF Set the lens focus mode switch to AF 2Set the AF mode AF Mode Selection One-Shot AF for Still Subjects About Predictive AF AI Servo AF for Moving Subjects Focusing points in the Area AF ellipse Area AF Ellipse and Focusing Points Basic Procedure for Focusing Point Selection Focusing Point SelectionSelecting a horizontal focusing point Selecting a vertical focusing point Automatic Selection Manual selection of 45 focusing pointsManual Selection Press the button and turn the dial Manual selection limited to 11 focusing points C.Fn-13-1/2 Manual selection limited to 9 focusing points C.Fn-13-3Selecting a peripheral focusing point Selecting the center focusing point Press the button which Registering a Focusing Point Press the button and button simultaneously Switching to the Registered Focusing Point Focusing Point Activation Area C.Fn-17 Focusing an Off-Center Subject AF Sensitivity According to the Lens Maximum Aperture When Autofocus Fails Manual Focusing Set the lens focus mode switch to MF or M on older lenses Manual Focusing Metering Modes 2Release the button Selecting a Metering Mode Evaluative Metering Metering ModesPartial Metering Spot Metering Focusing Point-Linked Spot Metering Centerweighted Averaging Metering Multi-Spot Metering Fixed Metering mark Multi-Spot Metering Display Shooting Modes Shutter Speed-Priority AE Press the shutter button halfway and focus the subject Aperture-Priority AE Aperture-Priority AE If the 30 shutter speed blinks, it indicates underexposure Depth-of-field AE 6Take the picture Exposure Warnings Depth-of-field AE Manual Exposure Using the Built-in Exposure Meter 5Refer to the exposure level 4Focus the subject Setting Exposure Compensation Exposure Compensation with the Dial4Take the picture Exposure Compensation with the Button and Dial 2Turn the dial to set the desired bracketing amount Autoexposure Bracketing Take the pictures Canceling AEB AE Lock Recompose the shot and take the picture Setting the Film Speed Manually Press and hold down the button and button simultaneously3Release the two buttons Multiple Exposure 3Set the shooting mode and take the pictures Exposure Compensation Guide for Multiple Exposures 3Start the bulb exposure Bulb Exposures Single-Frame and Continuous Shooting 2Turn the dial to set the desired film advance modeSingle-frame Shooting Continuous Shooting Maximum Continuous Shooting Rates When , , , , or Blinks 3Press the shutter button completely Self-timer Operation Depth-of-field Preview Using the Eyepiece Shutter Press the shutter button completely Mirror Lockup Using B/W Infrared Film 2Use the infrared index to adjust the distanceLCD Panel Illumination Flash Photography High-Speed Sync FP Flash TTL autoflashFE Flash Exposure Lock Flash exposure compensation Full Auto Flash TTL Autoflash in Other Shooting Modes2Check that the 550EX’s pilot lamp is lit Take the picture High-Speed Sync FP Flash FE Lock Part where you want to lockCheck that the Speedlite’s pilot lamp is lit Aim the spot metering circle over 4Compose the shot and take the picture Flash Exposure Compensation Desired flash exposure compensation amount2Take the picture FEB Flash Exposure Bracketing Modeling Flash Wireless, multi-Speedlite system Wireless, Multi-Speedlite System Using Other EOS-Dedicated Speedlites Using Non-Canon Flash Units Sync SpeedPC Terminal Custom Functions Custom Function No. appears on the LCD panel Selecting and Setting a Custom Functions Canceling All Custom Functions Canceling a Custom Function4Press the shutter button halfway Open the side door and press the button. Then press Button Custom Function Settings Fn-0Focusing screen characteristicsFn-1Auto film rewind mode Fn-2Film leader position Fn-3DX-coded film speed setting method Fn-4AF activation/AE lock Fn-5Manual Tv/Av settings Fn-6Exposure level increments Fn-7USM lens electronic manual focusing Fn-8Frame counter sequence Fn-10Focusing point flashing mode Fn-9AEB sequence and auto cancellation Fn-11-1This reverses the functions of the button and button Fn-11Focusing point selection method Fn-12Mirror lockup Fn-15Shutter curtain synchronization Fn-14Automatic reduction of fill flash output Fn-17Focusing point activation area Fn-16Safety shift Fn-18Switchover to registered focusing point Fn-19Lens AF stop button function switching Personal Functions Personal Functions 2Press the button to set the Personal Function mode Fn-0Custom Function GroupCustom Function Group Registration Selecting a Custom Function Group Standard Shooting Data Recording the Shooting Data 8For EOS-1V HS Users 2Install the batteries Remove the battery magazine High-speed continuous shooting Ultra-high speed continuous shootingLow-speed continuous shooting Single-frame shooting 2Detach the Power Drive Booster PB-E2 Install a battery in the Grip GR-E2. →p.19Attaching Grip GR-E2 Attach the Grip GR-E2 9Reference Section Exposure Basic Photography TermsShutter speed Aperture Depth of field is affected as described below Depth of field Troubleshooting Guide Film does Exposure Warning List Mode Blinking Warning Indication Countermeasures Program Line Description Program Line Shutter Speed and Aperture Readouts Shutter speed readoutAperture readout Open the side door and press Interchanging the Focusing Screen 128 Ni-MH Charger NC-E2 Major Accessories Battery Pack BP-E1 EX-series Speedlites Series Dioptric Adjustment Lenses Date Back DB-E2Anti-Fog Eyepiece Ec Wireless Controller LC-4 Remote Switch RS-80N3 Type Major SpecificationsViewfinder Exposure Control AI Servo AF Tracks subject movement up to the start Autofocus Film Transport ShutterFilm ID Imprinting w/standard camera back Shooting Data EOS-1V Camera Specifications 129 Index 139 140 Memo 142 143