LCD Panel Illumination

The LCD panel is provided with illumination. The LCD panel illumination button < > turns the illumination on ( 6 ) and off. It makes the LCD panel readable in darkness. The LCD panel illumination turns off 2 seconds after a picture is taken. For a bulb exposure, the illumination turns off when the bulb exposure starts.

Pressing any button while the LCD panel is illuminated prolongs the illumination.

Using B/W Infrared Film

ft m

ft m

Focusing Infrared index distance index

1 Focus the subject, then set the lens focus mode switch to MF (or M).

• Let’s say you will focus at 3 m.

2Use the infrared index to adjust the distance.

Turn the focusing ring so that the focusing distance is aligned with the infrared index. If it is 3 m, align the “3” with the infrared index.

Use a lens which provides an infrared index. With L-series lenses which do not have an infrared index, there is no need to compensate for infrared film.

It is recommended that you also take back-up pictures at slightly nearer and farther distances centering on the infrared index’s distance.

Also refer to the infrared film’s instructions.

Using a red filter enhances the infrared film’s effects.

The focusing distance need not be adjusted with color infrared film.

82

Page 82
Image 82
Canon EOS-1V HS manual LCD Panel Illumination, Using B/W Infrared Film, 2Use the infrared index to adjust the distance