Canon EOS-1V HS manual Attaching Grip GR-E2, Install a battery in the Grip GR-E2. →p.19

For EOS-1V HS Users

Attaching Grip GR-E2

You can replace the Power Drive Booster PB-E2 with the normal Grip GR- E2 (sold separately) found on the EOS-1V.

The GR-E2 uses one lithium 2CR5 battery.

1 Install a battery in the Grip GR-E2. (→p.19)

• As shown in the diagram, insert the battery with the contacts toward the bottom right. Then close the cover.

2Detach the Power Drive Booster PB-E2.

• Turn the Power Drive Booster PB- E2’s attachment knob as shown by the arrow to loosen it. Then slide down the Booster.

• On the bottom of the EOS-1V, attach the cover (provided with the GR-E2) on the film advance coupler. (→p.8)

3	Attach the Grip GR-E2.
	• Attach the Grip to the camera and
	tighten the Grip’s attachment screw.
2	• Attach the contact cover (provided
	with the GR-E2) to the Power Drive
	Booster PB-E2 to protect the
1	electrical contacts.

Cautions when using the Power Drive Booster PB-E2 with the EOS-1 and EOS-1N

•Do not use size-AA lithium FR6 batteries or the Nickel-Hydride Pack NP-E2 with the EOS-1. Doing so may damage the EOS-1’s electronic circuitry due to the high battery voltage.

•Do not use the Nickel-Hydride Pack NP-E2 with the EOS-1N. If the battery voltage gets really low, battery pack performance may deteriorate markedly.

118