Canon EOS-1V HS manual Troubleshooting Guide

Troubleshooting Guide

If there is a problem, first refer to this Troubleshooting Guide. If the problem still persists, take the camera to your nearest Canon Service Center. Canon Service Centers are listed on the back of this booklet.

Nothing is	<	> is <	>.	>. (→p.14)
displayed		Set the <	> switch to <
on the LCD	The battery is exhausted.
panel.
		Replace the battery with a new one. (→p.19, 20)
	The battery has been installed incorrectly.
		Install the battery correctly. (→p.19)
The camera’s	<	> is <	>.	>. (→p.14)
Custom		Set the <	> switch to <
Function	The < > switch is < >.
cannot be set.		Set the <	> switch to <	→	p.17)
				>. (
AF does not	<	> is <	>.	>. (→p.14)
work when		Set the <	> switch to <
the shutter	The lens focus mode is set to MF (or M).
button is
		Set the lens focus mode to AF (or A). (→p.21)
pressed	C.Fn-4 is set to 1 or 3.
halfway.
		Set C.Fn-4 to 0. (→p.100)
The shutter	The <		> icon blinks on the LCD panel.
does not		Take out the film and load it correctly. (→p.25, 26)
work.	The < > icon blinks on the LCD panel.
		Replace the battery. (→p.19)

The < > icon blinks while the rewound film is still in the camera.

Replace with a new roll of film. (→p.28, 25)

The in-focus indicator in the viewfinder blinks and focus cannot be achieved.

Select another focusing point. (→p.38) If focus still cannot be achieved, focus manually. (→p.48)

122