n• You can enter the fax numbers in any order.

If you enter a wrong destination, press Clear, then enter the correct destination.

You must enter the second destination within five seconds of entering the first one. All subsequent destinations must be entered within 10 seconds. If you wait longer than these times, the FAX automatically begins scanning the document for sending. If you do not want the FAX to begin scanning automatically after a few seconds, disable the TIME OUT setting (1 p. 14-6).

To review the destinations entered, use or ¨ to scroll through the numbers.

3Press Start/Copy to begin scanning for sending, or wait a few seconds for the FAX to begin scanning automatically.

The FAX will first send the document to the one-touch speed dialling destinations, then the coded speed dialling destinations, and finally to the destination dialled using regular dialling.

If you do not want the FAX to begin scanning automatically after a few seconds, disable the TIME OUT setting (1 p. 14-6).

To cancel sending once dialling has started, press Stop then T. Sending to all destinations you specified in step 2 will be cancelled. (You cannot cancel only one destination.)

n• If a number is busy, the FAX will continue sending to the other destinations and then automatically redial the number that was busy.

If the FAX’s memory becomes full while scanning your document, MEMORY FULL will appear in the LCD. If this happens, remove the remainder of the document from the ADF (you may need to open the operation panel to do so), then divide the document into several sections and send each section separately.

Sending Faxes

Chapter 7

Sending Faxes

7-13

Page 97
Image 97
Canon FAX-L240, FAX-L290 manual Chapter Sending Faxes